LH-W08

Wire-rope sleeve swaging tool

A focused direction for wire-rope sleeve terminations.

Sleeve matching
A defined connection part
Connected selection information

Download PDF guide Contact & selection details →All catalogs & product guides →

Overview

A wire-rope sleeve swaging tool focused on matching rope construction, sleeve material and crimp cavity at rope-end connections.

A tool direction for wire-rope sleeves, with attention to rope construction, sleeve material and the complete termination combination.

Features & working characteristics

Sleeve matching

Review sleeve shape and material alongside rope construction rather than selecting by appearance alone.

A defined connection part

Keep rope-end terminations distinct from cable retention performed with stainless tie tools.

Connected selection information

The model, connection part and application criteria sit in a shared reference linked to application pages and technical articles.

Start with these inputs

01
Rope construction
02
Sleeve shape and material
03
Intended use and verification

Product profile

Model: LH-W08
Product family: Wire-rope swaging
Application direction: Rope-end preparation for mechanical assemblies and non-load-bearing display connections.
Selection inputs: Rope construction / Sleeve shape and material / Intended use and verification
Connection part: Wire rope and metal sleeves; intended use and load requirements belong to the complete connection specification.
Scope and limitations: Load-bearing, lifting or life-safety connections require a validated solution for that purpose; tool appearance does not establish suitability.

IN DEPTH / LIHENGRIX

A closer look

From rope to sleeve termination

LH-W08 addresses metal-sleeve forming. Select sleeve material, rope construction and tool groove together rather than finding a sleeve that merely fits the rope diameter. Distinguish eye terminations from other arrangements; routing, tail position and accessories depend on the selected connection scheme.

Press location and dimensional inspection

Match the sleeve to its groove, stabilize the rope and follow the specified pressing areas and sequence. Use the corresponding gauge and method afterwards. A visually similar gauge slot is not a substitute, and a dimensional pass does not independently assign a load rating to the termination.

Symptoms and diagnostic directions

Scroll horizontally to view the full table

Observation	Check first
Sleeve does not pass its gauge	Sleeve/groove combination, pressing sequence and tool closure
Eye or tail position changes	Assembly restraint, rope routing and movement during pressing

Specify the complete termination

Record rope, sleeve, thimble and attachment as well as the tool. A load-bearing termination needs components and acceptance defined by an applicable scheme; the name or image of a hand swager does not establish lifting or personnel-protection suitability.

CARE & ORGANIZATION

Care & storage

01
Keep working surfaces and connection parts clean; check for visible damage, looseness and unusual wear before use.
02
Follow the tool and matched connection-part documentation for use, maintenance and adjustment.
03
Store away from moisture and impact, keeping accessories and model references with the tool.

MODEL QUESTIONS

About this model

What information starts the selection?

Identify the connection part first, then review: Rope construction, Sleeve shape and material, Intended use and verification.

Where can I find application references?

The application section links working contexts and the reading section explains identification and matching. Download the catalogue for a consolidated model reference.

APPLICATIONS