LH-P16

Manual copper pipe press tool

Begin with the fitting system and its connection requirements.

System-first matching
Manual working clearance
Connected selection information

Download PDF guide Contact & selection details →All catalogs & product guides →

Overview

A manual copper pipe press tool for matched pipe-and-fitting connections, selected by fitting system, press profile and working clearance.

Begin with the fitting system and distinguish press profile, pipe diameter, material and tool accessory requirements.

Features & working characteristics

System-first matching

Identify the tooling combination from the fitting family, checking profile and diameter separately.

Manual working clearance

Consider jaw access and handle clearance when planning pipe assembly tasks.

Connected selection information

The model, connection part and application criteria sit in a shared reference linked to application pages and technical articles.

Start with these inputs

01
Fitting system and material
02
Press profile
03
Tool and jaw combination

Product profile

Model: LH-P16
Product family: Copper pipe pressing
Application direction: Building pipework assembly and fitting-selection documentation.
Selection inputs: Fitting system and material / Press profile / Tool and jaw combination
Connection part: Copper pipe and press fittings; match the press profile to the fitting family.
Scope and limitations: Check profile, size and service-medium requirements within the fitting system; appearance or common diameter does not establish compatibility.

IN DEPTH / LIHENGRIX

A closer look

System fit and access for manual pressing

LH-P16 addresses matched copper press applications. Define the tube, fitting system, profile and size first, then review head and handle clearance. Fitting the tool over a connection does not mean the complete stroke is possible or that system compatibility is established.

Tube end, seal and insertion position

Prepare the end and remove interfering debris or burrs, then inspect the seal according to the selected system. Mark the prescribed insertion depth and recheck seating while arranging the tool. After the full cycle, review the joint and marking before the required system tests.

Symptoms and diagnostic directions

Scroll horizontally to view the full table

Observation	Check first
Handle travel is obstructed	Clearance, tool arrangement and assembly order
Insertion mark moves	Tube seating, support and withdrawal during handling

Separate tooling from medium suitability

Water, gas and other media require suitability established by the fitting and system documentation. A jaw profile is not a universal medium approval. Address abnormal joints by the system rework procedure rather than assuming additional pressing repairs them.

CARE & ORGANIZATION

Care & storage

01
Keep working surfaces and connection parts clean; check for visible damage, looseness and unusual wear before use.
02
Follow the tool and matched connection-part documentation for use, maintenance and adjustment.
03
Store away from moisture and impact, keeping accessories and model references with the tool.

MODEL QUESTIONS

About this model

What information starts the selection?

Identify the connection part first, then review: Fitting system and material, Press profile, Tool and jaw combination.

Where can I find application references?

The application section links working contexts and the reading section explains identification and matching. Download the catalogue for a consolidated model reference.

APPLICATIONS